ALIBI ALI-DVR1004E 960H User Manual Download Page 50

Page: 50 / 116

5.2 Playback

5.2.1 Playing back video by channel

Playback the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Instant playback by channel

In Live View mode, click the channel you want to playback, then click the playback icon on the quick setting toolbar. In the instant
playback mode, only recordings made during the previous five minutes on the channel are played.

Playback by channel

1. Open the Playback menu. Go to

Menu | Playback

2. In the

Playback

screen, select the camera channel you want to playback. De-select the other channels.

3. Select the start and end times of the date and time range when the video segment was recorded.

SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP

Summary of Contents for ALI-DVR1004E 960H





















































































































Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands

ALIBI ALI-DVR1004E 960H, User Manual

Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands