manualshive.com logo in svg

ALGE-Timing TdC 8000, Manual, Page: 46 / 108

Share
Download
ALGE-Timing TdC 8000 Manual Download Page 46

TdC 8000 for Equestrian 

               

Page 46

Version:E-00-08-08

Page 46

Parcour Time 1

Menu 39

Parcour Time 1 = 000.00

It is very important that you adjust the parcour time (the maximum allowed time). If you do not input
the parcour time it will not add penalty points for time violation.

Menu 39: PARCOUR TIME 1 = 000.00

Input the maximum allowed time

Save with: ENTER

Save and exit with <ENTER>

Pre adjusted value::

no parcour time is pre adjusted!

Block Time:

Menu 41

Block Time 1 = 000.00

As long as the block time is running, it will take every impulse of the finish photocell as a not valid
impulse. This time will be printed only as time of day with a question mark. The time will not be
stopped on the display (7) or display board. Use the block time for events where the rider passes
the finish photocell before he reaches the finish.

Menu 41: BLOCK TIME 1 = 000.00

Input the block time

Save with:: ENTER

Save and exit with <ENTER>

Pre adjusted value::

no block time is pre adjusted!

Count Down Time 1: Menu 43

Count Down Time 1 = 000060.00

You can adjust the count down time between 0 and 6399.99 seconds. The count down time is the
time between the greeting of the judges and the time when the rider must start. It is possible to
show the count down time on a display board (see menu 43). A horn (if connected) honks at the
start and end of the count down.

Menu 43: COUNT DOWN TIME 1 = 000060.00

Input count down time

           AUTOMATIK START = ON

Auto-Start after expired countdown

Save with:: ENTER

Save and exit with <ENTER>

Pre adjusted value::

Count Down Time = 60 seconds
Automatik Start = ON

Countdown for Display Board

Menu 45

D-Board Count Down = ON

You can switch off the countdown for the display board. All other functions of the countdown work, if
the countdown for the display board is off.

Menu 45: D-Board Count Down         ON<

output on display board

                                   OFF

no output on display board

Save with:: ENTER

Save and exit with <ENTER>

Pre adjusted value::

D-Board Count Down = on

Summary of Contents for TdC 8000













































































































Reviews:

No comments