TdC 8000 for Equestrian
Page 27
Version: E-01-08-08
Page 27
-
You can increment through the finish list with the cursor keys (¢ and £) or input the start
number with the finish keyboard (15).
-
Confirm the start number with <ENTER>
-
The cursor is now on the first digit of the time:
Input: 0015 C1 13:15:35.486 NEW No F1
valid finish time
c0015 C1 13:10:12.498 DISQU. F2
time cleared
with <CLEAR>
?0015 C1 13:17:28.938
time not valid (e.g. from <BLOCK>
-
You can select the correct finish time with the cursor key (¢ and £). When you press
<ENTER> it makes the selected time valid.
-
You can also over write the valid finish time (first line) with the numbers of the finish keyboard
(15) (manual input of the finish time).
-
If you want to give the selected time to another start number press <F1> and input the new
start number.
-
To disqualify the competitor (start number) press <F2>. The disqualified time is marked with
a d. For a disqualification it clears the start time, finish time, and run time.
-
Exit the input menu by pressing <INPUT> of the finish keyboard (15) again.
Attention:
-
If it shows
00:00:00.000
as finish time, it means that you have no finish time
for this start number.
-
If you make another finish time valid, it stores the old finish time with a c (clear).
E.g.:
c 0009 FT 12:15.22.157
4.3.2.4. Editing Run times and Finish Times
If you press <MENU> and <INPUT> of the finish keyboard (15) together you get into the menu to
edit run times and finihs times.
-
Press <MENU> and <INPUT> at the same time.
-
The info-display (6) shows the following:
Input times: FINISH TIME< F1
<F1>
to change the
RUN TIME F2
run time
<F2> to change the
time
Continue: ENTER
memory
-
Select the time you want to change with <F1>, <F2> or ¢ and £.
-
Changes are made like described in following three chapters.
-
Exit the menu by pressing <MENU> and <INPUT> together.
4.3.2.4.1. Editing a Finish time
You can edit the following:
-
over write a run time with keyboard (15)
-
copy the run time of a start number to another start number.
-
Disqualification of a competitor (start number)
Changing a run time:
-
Press <MENU> and <INPUT> together
-
Press <F1>
-
Press <ENTER>