ALFAMATIC Press-Right, User Manual, Page: 27 / 42

27
8 Measured values
Press-Right stores the motion-force curve and it measures the some parameters which may be
monitored thanks to the limits. The curve stored can be analyzed with the analysis cursor (chapter
8.2). The vales measured may be visualized at the end of each process (chapter 8.1) and may be
measured by an external controller by means of a serial code.
8.1 The window of measured values
The main menu includes the command
SHOW MEASURED VALUES
referred to the the last production
process. This command shows the window of measured values with its piece counter, the result and
the measured values of the last processed piece. This window may be visualized at the end of each
process by changing the option in the menu
TOOLS > DISPLAY MANAGEMENT > DISPLAY
OPTIONS
.
When the piece is rejected, the discard cause menu is displayed.
If there are multiple discard causes it is possible to scroll the list by using the
and keys.
If the job has multiple phases, the measured values refer to the last phase; to view the values
referred to the other phases, use the
and keys.
Figure 15
Figure 16
NUMBER OF GOOD PIECES
It is the number of good pieces manufactured. Every job has its own counter. To reset the good
piece counter, see chapter 4.6.
NUMBER OF REJECTED PIECES
It is the number of rejected processed pieces. Every job has its own counter. It is possible to
stop the press if this counter reached the set maximum number. To reset the rejected piece
counter and set the maximum number, see chapter 4.6.
SPECIAL REJECTED PIECES
It is the number of rejected processed pieces classified as special. If only one cause is set to
classify special rejected pieces, the description of such cause is entered. Every job has its own
counter. To reset the rejected piece counter, see chapter 4.6. To set the class of rejected pieces,
see chapter 7.
FORCE REACHED
It shows the value of the maximum force reached in the whole acquisition cycle. It may be
controlled by the force limits (chapter 5.2).
POSITION REACHED
It shows the value of the maximum height reached in the whole acquisition cycle. It may be
controlled by the height limits (chapter 5.2).
INITIAL POSITION
It is the job absolute initial height (chapter 1.3). It may be controlled by the initial height limits
(chapter 5.2).