ALFAMATIC Press-Right, User Manual, Page: 18 / 42

18
4.14.1 Additional monitoring options
The monitoring options are as follows:
DO NOT RUN THE ADDITIONAL MONITORING SESSION
The additional monitoring session is not performed.
MEASURE AT START
The additional monitoring is carried out when the device receives a START command.
MEASURE AT SHUTDOWN
The additional monitoring is carried out when the device commands the shutdown and the
piece is good.
MEASURE AT THE END
The additional monitoring is carried out when the press is back to position.
MEASURE AT A SPECIFIC HEIGHT
The additional monitoring is carried out at a set height by means of the
HEIGHT MEASURE
parameter in the
ADDITIONAL MONITORING MANAGEMENT
menu.
MEASURE FROM A SPECIFIC HEIGHT
The additional monitor is carried out starting from a set height by means of the
HEIGHT
MEASURE
parameter in the
ADDITIONAL MONITORING MANAGEMENT
menu until the end of the
production process.
MEASURE UP TO A SPECIFIC HEIGHT
The additional monitoring session is carried out starting when the device receives the START
command up to a set height, by means of the
MEASURE HEIGHT
parameter of the
ADDITIONAL
MONITORING MANAGEMENT
menu.
MEASURE DURING
The additional monitorinf is maintained throughout the whole process.