3 Introduction
SaniMidget/SaniMagnum/SaniMega SB
3.2
Intended use
It is to be verified by the end-user:
-
that the tank cleaning machine is in conformity with respect to tank, vessel or container size in which it will be used.
-
that the construction materials (both metallic and non-metallic) are compatibility with product, flushing media, cleaning
media, temperatures and pressure under the intended use.
The tank cleaning machine is intended for use in closed tank, vessel or container. If used in open environment see 4.3 General
safety and installation instructions (page 14).
Steam cleaning
If stream cleaning is done through the machine, the steam pressure must not cause the machine to rotate.
See paragraph 4.4 Specific conditions for safe use in accordance with ATEX/IECEx certification (page 16).
See General Installation Instructions on page 14 of this manual for information on recommended installation position.
3.3
Patents and trademarks
This Instruction Manual is published by Alfa Laval Kolding A/S without any warranty. Improvements and changes to this
Instruction Manual may at any time be made by Alfa Laval Kolding A/S without prior notice. Such changes will, however,
be incorporated in new editions of this Instruction Manual.
Alfa Laval, Kolding A/S. All rights reserved.
The Alfa Laval logotype is a trademark or a registered trademark of Alfa Laval Corporate AB. "Toftejorg" is a trademark or
registered trademark of Alfa Laval Kolding A/S. The Alfa Laval Toftejorg™ SaniMxxx SB series product has patent in the US
(US 8.137.481). Other products or company names mentioned herein may be the trademarks of their respective owners. Any
rights not expressly granted herein are reserved.
7
