4 Installation
SaniMidget/SaniMagnum/SaniMega SB
4.6
Assembly
The Alfa Laval Toftejorg SaniMxxxx SB itself is assembled as follows (for the weld-on version, weld the connector onto the down
pipe as explained above):
1. Insert the cylindrical end of the stator (3) through the Rotor (2). If the logo is upside down then the rotor is wrongly orientated
(see below for correct orientation of logo).
Note: The arrow on the rotor shows the flow direction
4114-0018
2. The cylindrical end of the stator (3) is then inserted into the centre hole of the Connector (1). The stator can be inserted to its
full extent in one position only. When the stator is fully inserted into the connector, the rotor (2) will be fixed between the
bearing surface of the stator and connector
A
4114-0019
A: Down pipe if weld-on version
20
