4 Installation
SaniMidget/SaniMagnum/SaniMega SB
3. Having inserted the stator (3) into the connector (1) turn the stator 90° to align the hole in the cylindrical end of the stator with
the holes in the connector.
4114-0020
4. Weld-on version: Insert the clip (4) through the hole in one side of the connector (1), through the hole in the stator (3)
and through the hole on the other side of the connector.
Clip-on version:Holding the machine in one hand (hand below the stator) slide the Alfa Laval Toftejorg SaniMxxx SB onto the
downpipe. Align the clip holes in the connector (1) with the clip holes in the down pipe, while mounting the clip through
the hole in the connector, the down pipe, the stator (3), the other side of the down pipe and finally out through the other
side of the connector.
4114-0021
Hold hand here
21
