6 Maintenance
SaniMidget/SaniMagnum/SaniMega SB
6.4
Dissassembly
Disassemble machine as described on the following pages.
1. Hold one hand under the stator (3) of the Alfa Laval Toftejorg SaniMxxxx SB.
4114-0025
Hold hand here
2. With the other hand unlock the clip (4) and withdraw it from the holes to loosen the Alfa Laval Toftejorg SaniMxxxx SB from
the down-pipe (for weld-on version: from the connector).
3. Still holding the hand under the stator (3), lower the Alfa Laval Toftejorg SaniMxxxx SB free from the down pipe and remove it
from the tank together with the clip (4).
4. When out of the tank, turn the Stator (3) 90° to allow it to be withdrawn from the connector (1).
This completes the disassembly and the four parts (stator, rotor, connector and clip) of the Alfa Laval Toftejorg SaniMxxxx SB
can be inspected. For the weld-on versions, the connector (3) is still on the down pipe and shall be inspected on the inside by
looking down through the straight down-pipe.
6.5
Reassembly
Reassembly is carried out according to the installation instruction given on page 14.
27
