4 Installation
SaniMidget/SaniMagnum/SaniMega SB
4.3
General safety and installation instructions
It is recommended to install a filter with mesh size 250 µm (0.01”) in the supply line to avoid particles, scale etc. from clogging
the inside of the cleaner. However, particles up to 0.8 mm can pass the cleaning slots in the rotor.
Before installation, all supply lines and valves must be thoroughly flushed to remove remains from welding, grinding dust,
scale and other foreign matter. During handling and installation handle the machine with care in order not to damage the
fine surface of the machine.
Randomly selected Alfa Laval Toftejorg SaniMxxxx SB machines are tested at the factory before shipping, in accordance
with “Test Requirements for SaniMxxxx SB”.
Warning:
Precautions shall be made to prevent starting the cleaning operation, while personnel are inside the tank or
otherwise can be hit by water jets from the cleaner head.
NOTE
The machine shall be installed in accordance with national regulations for safety and other relevant regulations and standards. In
EU-countries the complete system must fulfil the EU-machine Directive and depending of application, the EU-Pressure Equipment
Directive, the EU-ATEX/IECEx Directive and other relevant Directives and shall be CE-marked before it is set into operation.
1
Connector
2
Rotor
3
Stator
4
Clip
4114-0016
14
