6.
Lubricate the square ring elastomer (101)
and fit to the rotary seal face (102)
ensuring the rounded edge is fitted in to
the radius of the seal face part as shown
in the diagram. Note: the coloured dot
should be facing away from the rotary
seal face.
7.
Align the cut out on the rotary seal face
(102) with the pins in the bore of the rotor
(3) and press back gently until fully
seated.
8.
Wipe clean the rotary seal faces with
solvent.
9.
Refit the rotors (3), rotor nuts (4) and
rotorcase cover (1) as per the main
assembly instructions in Section 5.4
3206-0076
3206-0045
102
101
3206-0077
200002348-1-EN-GB
49
Maintenance 5
EN
Summary of Contents for DuraCirc Range
Page 4: ......
