Reassembly
1.
Wipe the mating surfaces of the rotorcase (2) and jacket (17) with a solvent
and ensure the O-ring groove is clean and free of debris and damage
(replace jacket if required).
2.
Lightly lubricate new o-rings (18) and push firmly in the jacket O-ring
groove.
3.
Position the jacket on the rotorcase (2), fit screws (19) and tighten to the
values given in the table below.
4.
Refit the rotorcase (2), rotors (3), rotor nuts (4) and rotorcase cover (1) as
per the main assembly instructions in Section 5.4
5.
Refit jacket connection pipes, refill and check for leaks.
32/33/34
42/43
52/53/54
62/63
72/73/74
Screw Size / Torque
M5
M5
M6
M8
M8
Torque Setting
5 Nm
4 lbft
5 Nm
4 lbft
10 Nm
7 lbft
20 Nm
15 lbft
20 Nm
15 lbft
Flush connection BSP(G)
NPT with Adaptor
1/8”
1/8”
1/4”
1/4”
1/4”
All flush connections are Female
200002348-1-EN-GB
58
5 Maintenance
EN
Summary of Contents for DuraCirc Range
Page 4: ......
