Alcorn Mcbride LightCue, User Manual

Page: 47 / 60

Control Protocols
Set command:passwordPW<0D>
Message Response:R<0D>
DST Enable
Description:This command will get or set the status of the daylight saving time param-
eter.
Comments: 0 = Standard Time, 1 = using DST.
Get command:SD<0D>
Message Response:current setting<0D>
Set command:1SD<0D>
Message Response:R<0D>
DST Type
Description:This command will get or set the status of the daylight saving time Type.
Comments: Example are: 1 = US, 2 = Universal, 3 = Australia, 4 = Europe.
Get command:DT<0D>
Message Response:current setting<0D>
Set command:1DT<0D>
Message Response:R<0D>
Time Zone
Description:This command will get or set the Time Zone.
Comments: The time zone 0 is the Greenwich Mean Time GMT. Time zones going
west are given –1 numbers and +1 going east from GMT 0 until the International Date
Line is reached. Eastern TZ in the USA is -5
Get command:TZ<0D>
Message Response:current timezone<0D>
Set command:-5TZ<0D>
Message Response:R<0D>
NTP IP Address
Description:This command will get or set the NTP IP address needed to contact the
timeserver.
Get command:NI<0D>
Message Response:(current NTP address)<0D>
Example:Send Command:NI<0D>
Response:ntp.org<0D>
- 39 -