Alcorn Mcbride LightCue, User Manual

Page: 42 / 60

Chapter 2
Example:"001U2LO" <CR> Pile-on cue number 1 and
loop at end on Universe 2
“3U1LO”<CR>Pile-on cue number 3 and
loop at end on Universe 1
Clear Cue
Description: This command causes the Light Cue Pro to clear a cue which is currently
being piled-on. The cue will be taken out of the comparison.
Command bytes:nnnUuCL<CR>
nnn – the Cue number to remove
u – the Universe number. Use * for all.
Message Response:R<CR>
Example:"001U*CL" <CR> Clear Cue Number 1 from all Universes
“3U1CL”<CR> Clear Cue Number 3 from Universe 1
Feedthrough
Description: This command causes the Light Cue Pro to pass the data from the input
DMX connector to the output, bypassing the data recorded in the unit. Playback of
recorded data will continue if it was in progress when this command was received,
however the data will not be output.
Command bytes:nUuFT<CR>
If n=1 feedthrough is actvated
If n=0 feedthrough is deactivated
u – the Universe number. Use * for all.
Message Response:R<CR>
Comments: "Feedthrough" will display on the main front LCD screen for the cor-
responding universe when activated.
Example:"1U*FT" <CR> feedthrough is activated on all Universes
“0U1FT”<CR>feedthrough is deactivated on Universe 1
Force Value
Description: Force a DMX channel to specified value.
- 34 -