Alcorn Mcbride LightCue, User Manual

Page: 19 / 60

Getting Started
Getting Started
This section will teach you how to begin using your LightCue. More detailed infor-
mation is contained in the rest of this manual.
LightCue Manager Software
Free software to control/monitor/edit lighting cues can be downloaded from our web-
site (www.alcorn.com) under the "software" page. This software is the preferred
method for recording and playback of lighting cues.
See the section "LightCue Manager" for more detail on it's use.
Connecting the Unit
1. Connect the DMX Out from your Lighting Console to the DMX In on the rear of
the LightCue.
2. Connect the DMX Out from the LightCue to the DMX Input of your Dimmer Rack.
3. Optionally, connect the SMPTE Out from your SMPTE generator (e.g. Alcorn
McBride SMPTE Machine) to the SMPTE In on the rear of the LightCue.
Note: SMPTE is only required if it is necessary to synchronize lighting cues to other SMPTE equipment
Recording a Cue
After connecting the unit, use the front panel or LightCue Manager to record a cue.
Playing a Cue
After recording a cue, use the front panel or LightCue Manager. To configure front
panel buttons or inputs to start a particular cue, use LigthCue Manager
"Inputs" screen.
- 11 -