Alcorn Mcbride LightCue, User Manual

Page: 46 / 60

Chapter 2
Description:This command will get or set the IP address of the gateway the unit will
connect through.
Comments: xxx is a decimal number in the range of 0 – 255.
Get command:GW<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxxGW<0D>
Message Response:R<0D>
Date
Description:This command will get or set the calendar date.
Comments: mm/dd/yyyy Month/Day/Year.
Get command:DA<0D>
Message Response:mm/dd/yyyy<0D>
Set command:mm/rr/yyyyDA<0D>
Message Response:R<0D>
Time
Description:This command will get or set the time of day.
Comments: hh:mm:ss Hours/Minutes/Seconds.
Get command:TI<0D>
Message Response:hh:mm:ss<0D>
Set command:hh:mm:ssTI<0D>
MessageResponse:R<0D>
User Name
Description:This command will get or set the user login name.
Comments: The default name is admin.
Get command:US<0D>
Message Response:(current login)<0D>
Set command:(new login)US<0D>
Message Response:R<0D>
Get/Set Password
Description:This command will get or set the password.
Comments: The default password is password.
Get command:PW<0D>
Message Response:password<0D>
- 38 -