Alcorn Mcbride LightCue, User Manual

Page: 44 / 60

Chapter 2
Description: This command causes the Light Cue Pro to respond with the dmx files
currently playing. The word "none" is returned if no cues are playing.
Command bytes:UuCC<CR>
u – the Universe number.
Message Response:"ccccccc.ccc" , "ccccccc.ccc" <CR>
where "ccccccc.ccc" is the ASCII representation of the file currently playing on that
Universe separated by commas
Example:"dmx00001.dmc","dmx00002.dmc" <CR> Cue numbers 1, & 2 are playing
None<CR>no cues are playing (unit is idle)
Reset
Description: This command causes the LightCue Pro to stop the playback of all active
cues and hold the current look.
Command bytes:UuRJ<CR
u – the Universe number. Use * for all.
Message Response:R<CR>
Pile-On Priority
Description: When set to 1, the LightCue Pro is in "Last Takes Priority" mode. Regard-
less of whether the DMX Value is higher or not, the last piled on value for that channel
will be applied.
Command bytes:nPP<CR
n = 1 – Last Takes Priority
n = 0 – Highest Takes Priority
Message Response:R<CR>
Longitude
Description:This command will get or set the longitude coordinates.
Get command:LN<0D>
Message Response:current value<0D>
Example:
Send Command:LN<0D>
Response:81.0<0D>
Set command:81.0LN<0D>
Message Response:R<0D>
- 36 -