Alcatel OmniStack 6124, User Manual

Page: 98 / 136

Web-Based Management
3-30
VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features.
Parameter Description
PVID The VLAN ID assigned to untagged frames received on this port. Use the PVID
to assign ports to the same untagged VLAN.
Acceptable Frame Type This switch accepts “All” frame types, including VLAN tagged or VLAN untagged
frames. Note that all VLAN untagged frames received on this port are assigned
to the PVID for this port.
Ingress Filtering If set to “True,” incoming frames for VLANs which do not include this port in their
member set will be discarded at the inbound port.
GVRP Status* Enables or disables GVRP for this port. When disabled, any GVRP packets
received on this port will be discarded and no GVRP registrations will be
propagated from other ports.
Note that GVRP must be enabled for the switch before this setting to take effect.
(See “Configuring Bridge MIB Extensions” on page 3-20.)
GVRP Failed
Registrations*
The total number of failed GVRP registrations, for any reason, on this port.
GVRP Last PDU Origin* The Source MAC Address of the last GVRP message received on this port.
* GVRP is not available for the current firmware release.