Alcatel OmniStack 6124, User Manual

Page: 93 / 136

Configuring Virtual LANs
3-25
VLAN Current Table
This screen shows the current port members of each VLAN and whether or not the
port supports VLAN tagging. Ports assigned to a large VLAN group that crosses
several switches should use VLAN tagging. However, if you just want to create a
small port-based VLAN for one or two switches, you can assign ports to the same
untagged VLAN. The current configuration is shown in the following screen.
Note: The Up Time at Creation is the System Up Time when a user creates a specific
VLAN. The creation time is a static value and will not be saved after a reboot.
Parameter Description
VLAN Entry Delete Count The number of times a VLAN entry has been deleted from this table.
VLAN ID
The ID for the VLAN currently displayed.
Up Time at Creation The value of System Up Time (sysUpTime) when this VLAN was created.
Status Shows how this VLAN was added to the switch.
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
Egress Ports Shows the ports which have been added to the displayed VLAN group.
Untagged Ports Shows the untagged VLAN port members.