Alcatel OmniStack 6124, User Manual

Page: 38 / 136

Using the System Configuration Program
2-26
Viewing the Current Port Configuration
The Port Information screen displays the port type, status, link state, and flow control
in use, as well as the communication speed and duplex mode. To change any of the
port settings, use the Port Configuration menu.
Alcatel OmniStack 6148
< Port State > Unit 1 Port 1 - 12
Port Type Operational Link FlowControl Speed and Security
InUse Duplex InUse State
----------------------------------------------------------------------------
1 10/100TX YES DOWN -------------- ---------- DISABLED
2 10/100TX YES DOWN -------------- ---------- DISABLED
3 10/100TX YES DOWN -------------- ---------- DISABLED
4 10/100TX YES DOWN -------------- ---------- DISABLED
5 10/100TX YES DOWN -------------- ---------- DISABLED
6 10/100TX YES DOWN -------------- ---------- DISABLED
7 10/100TX YES DOWN -------------- ---------- DISABLED
8 10/100TX YES DOWN -------------- ---------- DISABLED
9 10/100TX YES DOWN -------------- ---------- DISABLED
10 10/100TX YES DOWN -------------- ---------- DISABLED
11 10/100TX YES DOWN -------------- ---------- DISABLED
12 10/100TX YES DOWN -------------- ---------- DISABLED
<Ok> <Up unit> <Down unit> <Prev page> <Next page>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
Type Shows port type as:
10/100TX: 10BASE-T
/ 100BASE-TX
100FX: 100BASE-FX
1000SX: 1000BASE-SX
1000LX: 1000BASE-LX
1000T: 1000BASE-T
GBIC: 1000BASE-X Transceiver
Operational Shows if the port is functioning or not.
Link Indicates if the port has a valid connection to an external device.
FlowControl InUse Shows the flow control type in use. Flow control can eliminate frame loss
by “blocking” traffic from end stations connected directly to the switch. Back
pressure is used for half duplex and IEEE 802.3x for full duplex. Note that
flow control should not be used if a port is connected to a hub.
Speed and Duplex InUse Displays the current port speed and duplex mode used. (Note that
Auto-negotiation is not available for 100BASE-FX ports.)
Security State* Indicates the port’s security status:
DISABLED - security is disabled on the port.
LEARNING - the port is currently learning MAC addresses to “lock-in” for
secure access.
SECURED - the port has learned MAC addresses, or has them statically
configured and is operating in secure mode.
LOCKED - port has been disabled due to a security violation (only when the
security action is set to disable).
* For more information, see “Port Security Configuration” on page 2-39.