Alcatel OmniStack 6124, User Manual

Page: 22 / 136

Using the System Configuration Program
2-10
Changing the Network Configuration
Use the Network Configuration menu to set the bootup option, configure the switch’s
Internet Protocol (IP) parameters, enable the on-board Web agent, or to set the
number of concurrent Telnet sessions allowed. The screen shown below is
described in the following table.
Alcatel OmniStack 6148
< Network Configuration >
IP Configuration
IP Connectivity Test(Ping)
HTTP Configuration
MAX Number of allowed Telnet sessions (1-4) : 4
Physical Address : 99-99-99-23-44-57
<Apply> <Ok> <Cancel>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
IP Configuration Screen used to set the bootup option, or configure the switch’s IP
parameters.
IP Connectivity Test (Ping) Screen used to test IP connectivity to a specified device.
HTTP Configuration Screen used to enable the Web agent.
MAX Number of Allowed Telnet
Sessions
The maximum number of Telnet sessions allowed to simultaneously
access the agent module.
Physical Address Physical address of the agent module.