Alcatel AST570 User Manual Download Page 130

Page: 130 / 300

Needed information

Multiple destinations

PC(s)

12 Configuration and Use - CIP & IP Routing

130

/ 300

3EC 17766 AAAA TCZZA Ed. 04

12.1 Preparatory Steps

VPI/VCI

value of the VC(s) to use on the DSL line

IPoA (RFC1483/Routed) connection service

must be

supported on this VC

Encapsulation

method (LLC/SNAP)

For full compliancy to RFC1577 the remote access device

must issue and respond to

InATMARP

messages.

Note

: The RFC1577 on which Classical IP over ATM relies is updated by

RFC2225. The

AST570

fully complies with both RFCs.

The

AST570

can manage up to 12 CIP connections

simultaneously.

Note

: Check with your SP whether multiple endtoend connectivity is enabled.

In order to use the CIP & IP Routing mode of the

AST570

, the OS

on your PC(s) must support TCP/IP.
See chapter 14 for more information on IP.

Summary of Contents for AST570













































































































































































































































































































Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands

Alcatel AST570, User Manual

Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands