Alcatel AST570 User Manual Download Page 85

Page: 85 / 300

Introduction

Note

In this section

The 'PPP' page and

description

9 Configuration and Use - Routed PPPoE

/ 300

3EC 17766 AAAA TCZZA Ed. 04

9.3

Routed PPPoE Configuration

This section describes the use of the

AST570

'PPP'

page for

Routed PPPoE.

Most, if not all configurations for Routed PPPoE connections are

identical to the configuration of Routed PPPoA connections.

Therefore most configurational aspects in this section will be

referred to the configuration sections of chapter 11.

The

'PPP'

Page and Description

Adding Entries

Deleting Entries.

Click

in the left pane of the

AST570

pages to pop up the

PPP'

page (See section 21.2 for more information):

See section 11.3 for a description of all fields of the '

PPP

Configuration'

table.

Summary of Contents for AST570













































































































































































































































































































Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands

Alcatel AST570, User Manual

Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands