Alcatel AST570, User Manual

Page: 75 / 300

The 'MER Settings'
table
'MER Settings' table
components
7 Configuration and Use - Routed Ethernet
75 / 300
3EC 17766 AAAA TCZZA Ed. 04
The following figure shows the 'MER Settings' table:
Field Description
Intf
Interface Indicates the interface name for the Routed Ethernet entry.
Note : In most cases, the interface name will be the same as
the phonebook entry name.
Address Indicates the phonebook entry used by the Routed Ethernet
entry.
State
Indicates the state of the Routed Ethernet interface.
Note : Unless the interface is created via the CLI, Routed
Ethernet entries are always in state connected .
Encap
Encapsulation
Indicates the applied encapsulation method for Ethernet
frames(*) on the VC.
The
AST570 supports both the LLC/SNAP method (default)
and the VCMUX method.
FCS Indicates whether the last four bytes of the Ethernet frames
are preserved or not. By default the FCS is set to
NO
.
Note : You can set the FCS to
YES
via the CLI.
IP Address
IP Netmask Indicates the negotiated IP address and netmask used by the
Routed Ethernet entry.
In case DHCP is checked (
) this IP address is dynamically
assigned by the remote DHCP server. If DHCP is unchecked,
you must enter a static IP address for the local side of the
Routed Ethernet connection.