Alcatel AST570 User Manual Download Page 197

Page: 197 / 300

Introduction

In this chapter

15 Networking Services - DNS

197

/ 300

3EC 17766 AAAA TCZZA Ed. 04

15 Networking Services - DNS

IP addresses are fundamental to the operation of the Internet.

They not only uniquely identify Internet nodes but also allow IP

routers to forward packets to their destinations.
IP addresses, being 32bit numbers, are ideally suited for

computers but are far from usable to humans.
Therefore, the

Domain Name System (DNS)

was designed: a

distributed database, held by a hierarchical system of servers, that

is used by TCP/IP applications to map between hostnames and IP

addresses.
This chapter describes

AST570

' DNS abilities.

Topic

See

AST570

DNS Resolving

15.1

Configuring the

AST570

DNS Server

15.2

Summary of Contents for AST570













































































































































































































































































































Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands

Alcatel AST570, User Manual

Search results

Summary of Contents for AST570

Reviews:

Related manuals for AST570

Brands by name

Popular brands