Alcatel AST570, User Manual

Page: 76 / 300

Adding entries
Deleting entries
7 Configuration and Use - Routed Ethernet
76 / 300
3EC 17766 AAAA TCZZA Ed. 04
Field Description
MAC Address Indicates the MAC address for the Routed Ethernet entry.
Note : In case no MAC address is entered manually, the
source MAC address of the Ethernet frames is the AST570
Ethernet MAC address.
NAT Indicates whether NA(P)T is used ( ) or not on the IP address
of the Routed Ethernet entry.
DHCP Indicates whether DHCP is used ( ) or not for the Routed
Ethernet entry.
(*) Ethernet frames are also referred to as Medium Access Control (MAC)
frames or IEEE802.3 frames.
Proceed as follows:
1. Browse to the 'MER' page.
2. If needed, click .
3. Select the phonebook entry from the 'Address' popdown list.
Note : In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 13.2 for more information.
4. Select the encapsulation method for the Bridging port from
the 'Encapsulation' popdown list (per default set to
LLC/SNAP).
5. Optionally, enter the appropriate configuration in one, or
more of the following fields:
The 'Interface' field
The 'IP Address' and 'IP Netmask' fields
The 'MAC Address' field.
6. Optionally, check one or more of the following checkboxes:
The 'NAT' checkbox
The 'DHCP' checkbox.
7. Click and to finish the procedure.
On the 'MER' page, click next to the entry you want to delete.
As a result your selection is highlighted.
Click
and .