B 40
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User’s Manual
Connecting an external printer
(ACDP option required)
3/4
Edition 04 - September 97
The connection of a PC micro-computer allows to customize
the reference of the parts to be tested under of the control of
the ACDP option (
see C50
).
Wiring and transmission are done in the same way as for
standard RS 232 link (
see B30
).
Sub D9 pin, female
( 7 and 8 Connections are necessary only if RTS and
LTS are used in a software created by user)
Connecting cable
Speed: . . . . . . . . . . . . . . 9600 bands
Data length: . . . . . . . . . . 8 bits
Parity: . . . . . . . . . . . . . . None
Stop bit: . . . . . . . . . . . . . 1
Link configuration
ASM 180 Compact version
ASM 181 Console version
1
5
9
6
1
9
6
5
Micro-computer
Detector
1 2 3 4 5
GND
(Ground)
CTS
(Clear to send)
DTR
(Data terminal ready)
TD
(Transmission data)
(Reception data)
RD
(Data set ready)
DSR
(Ready to send)
RTS
6 7
8 9
Connecting a PC
micro-computer to the
RS 232 printer interface