1/2
E 30
Alcatel Vacuum Technology France - ASM 180 TD/TD+ - ASM 181 TD+ User’s Manual
Edition 04 - September 97
Components :
P/N
Grease syringe . . . . . . . . . . . . . . . . . . . . 056993
Accessing the bearings
Remove the clips and use the
extractor to take out the plug
(see
F10 item 3
). Once the
extractor is in place, pull it
vertically.
Using the grease
syringe
The grease syringe is equipped
with a black clip
(A)
and a red
clip (
B)
.
These clips are used as stops to
control the amount of grease
injected into the bearing.
Greasing the front
bearing
Greasing the rear
bearing
Remove black clip
(A)
Push the grease syringe in
through the screw hole
(1)
until it comes up against a
stop. Inject grease pushing in
the plunger until it stops at
clip
B
.
Remove the red clip
B
and distribute the grease between
the injection points (smooth holes directly opposite each
other : 2).
B
A
1
2
Greasing the molecular drag
pump MDP 5011
The frequencies of preventive maintenance are
listed in D 10.