Alcatel 9400AWY, Installation Handbook

Page: 40 / 105

ED 01
3DB 05653 DAAA 39/104
2.3. 1+1 ODU configuration Installation with integrated antenna
2.3.1. Required Parts Listing
- Integrated antenna
- Antenna Mounting Hardware (Identify hardware and quantity according to hardware Figure 1 on page
12, Figure 2 on page 12 and Figure 3 on page 13 and Table 1 on page 16).
- Pole Mounting Assembly (Identify hardware and quantity according to hardware Figure 8 on page 15
and Table 1 on page 16).
- Outdoor Unit and mounting hardware.
1
2
3
4
5
6
7
8
8
Figure 34 - Typical installation pole mounting with ODU 1+1 for integrated antenna
1) U
bolts
2) Pole mounting
3) Radio mounting
4) Fastening points for COUPLER
5) Screws fastening the antenna to the support
6) Antenna screw-fastening slots
7) RF Coupler Fastening brackets for ODU
8) Grounding points
N.B.: To avoid equipment damage the bolt tightening torque for fixing the bolts (5) to antenna
slots (6) must be 80 kg x cm (8 Newton x m) (5.76 lb.ft). For U-bolts (1) the bolt tightening
torque must be 342.3 kg x cm (33.55 Newton x m) (24.65 lb.ft). Exceeding this value may
result in bolt breaking.