Alcatel 9400AWY, Installation Handbook

Page: 33 / 105

ED 01
3DB 05653 DAAA 32/104
2.2. 1+0 ODU configuration Installation with integrated antenna
2.2.1. Required Parts
- Integrated antenna
- Antenna Mounting Hardware (Identify hardware and quantity according to hardware Figure 1 on page
12 and Figure 2 on page 12 and Table 1 on page 16).
- Pole Mounting Assembly (Identify hardware and quantity according to hardware Figure 8 on page 15
and Table 1 on page 16).
- Outdoor Unit and mounting hardware.
2.2.2. Pole mounting assembly
This assembly is valid only for integrated antenna diameters up to 0.6 m (two feet). The integrated antenna is
mounted on the pole front. The outdoor “pole mounting“ system is designed for quick mechanical installation.
4
3
2
1
5
6
1) ODU radio (and detail of horizontal polarization)
2) U Bolts For Pole diameter from 90 mm up to 114 mm
3) Screws to fasten antenna to support
4) Antenna screw-fastening slots
5) Integrated Antenna (and detail of horizontal polarization)
6) Radio mounting
N.B.: To avoid equipment damage the bolt tightening torque for fixing the bolts (3) to antenna slots
(4) must be 80 kg x cm (8 Newton x m) (5.76 lb.ft). For U-bolts (2) the bolt tightening torque must
be 342,3 kg x cm (33,55 Newton x m) (24.65 lb.ft). Exceeding this value may result in bolt
breaking.
Figure 26 - Integrated pole mounting with ODU 1+0, Horizontal Polarization