....................................................................................................................................................................................................................................
4-25
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Installation
Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9
Finally, check the 9764 CMCO is correctly locked into position and there is no movement
of the module on the mounting frame.
E
...
N
...
D
.....
O
...
F
.....
S
...
T
...
E
..
P
...
S
.....................................................................................................................................................................
Mount surge arrestor (optional)
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Although optional, Alcatel-Lucent strongly recommends for outdoor deployments, that
when the backhaul connection is configured for electrical Ethernet (GBE
10/100/1000BaseT) a surge arrestor is installed, as the electrical SFP does not provide
surge protection.
Follow these steps to mount the optional external surge arrestor onto the surge arrestor
bracket where the surge arrestor bracket has already been banded to a pole.
...................................................................................................................................................................................................
1
On the surge arrestor, unscrew the lower weatherized strain relief connector and locking
nut from the surge arrestor.
...................................................................................................................................................................................................
2
Site the surge arrestor onto the bracket so that the lower threaded Ethernet connection
point is positioned through the arrestor mounting hole.