Alcatel-Lucent 9500 MXC, User Manual, Page: 788 / 916

Vol. VI-B-62 Alcatel-Lucent
Low Memory
The notes field will provide details of the type of memory and remaining size.
NMS Configuration Error
The NMS configuration is invalid.
POST Failed
Power on self test did not complete without errors. The log entry identifies the
failed test.
Power On
The INU has completed a power on reset. Note that this entry could be replaced
by the standard cold start trap.
Protected Partner Mismatched Software Version
The protected partner does not have the same software version. The notes field
will display the local and partnered software versions.
Protection Switch
Protection switch has occurred. The log entry will include details of the reason
for the switch. Applies to RAC and DAC protection.
Protection Switch Failure
A required protection switch was unable to occur. The log entry will include
details of the reason for the failure.
Ring Configuration Mismatch
The ring configuration is mismatched to its neighbour node (eg. primary -
primary).
Ring Manual Mode Disabled
The manual ring wrap or unwrap mode has been deconfigured by the user.
Ring Manual Mode Enabled
The manual ring wrap or unwrap mode has been configured by the user. The log
entry serves as a warning that no automatic ring switching will take place while
this mode is active.