Alcatel-Lucent 7710 SR OS Interface Configuration Manual Download Page 36 | Manualshive

Page: 36 / 436

background image

Port Features

Page 36

7710 SR OS Interface Configuration Guide

profile to an FRF.12 UNI/NNI port. The FR scheduling class ingress re-assembly timeout is not
applicable to a FRF.12 UNI/NNI port.

MLFR/FRF.12 Support of APS, BFD, and Mirroring Features

The following APS support is provided:

•

Single-chassis APS is supported on a SONET/SDH port with FRF.12 UNI/NNI
fragmentation enabled on the port or on a constituent TDM circuit.

•

Single-chassis APS is supported on a SONET/SDH port with FRF.12 e2e fragmentation
enabled on one or more FR SAPs on the port or on a constituent TDM circuit.

•

Single-chassis APS is not supported on a SONET/SDH port with MLFR bundles
configured.

•

Multi-chassis APS is not supported on a SONET/SDH port with FR encapsulation
configured on the port or on a constituent TDM circuit.

The following BFD support is provided:

•

BFD is supported on an IP interface configured over a FR SAP with e2e fragmentation
enabled.

•

BFD is supported on an IP interface configured over a FR SAP on a port or channel with
UNI/NNI fragmentation enabled.

•

BFD is not supported on an FR SAP configured on an MLFR bundle.

The following mirroring support is provided:

•

Port mirroring and FR SAP mirroring on an MLFR bundle.

•

IP mirroring for an FR SAP on an MLFR bundle.

•

A mirror source can be an MLFR bundle or a FR SAP on an FR bundle.

•

Mirror destinations must be FR SAPs and must not be part of an APS group or an MLFR
bundle.

«
...
34
35
36
37
38
...
»

Summary of Contents for 7710 SR OS





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7710 SR OS

Brand: PaloAlto Networks Pages: 2

Brand: XMOS Pages: 6

Brand: WAGO Pages: 48

Brand: BEC Pages: 159

Brand: Quantum Pages: 7

Brand: ICP DAS USA Pages: 8

Brand: Accton Technology Pages: 78

Brand: Perle Pages: 491

Brand: IEI Technology Pages: 2

Brand: Xantech Pages: 5

Brand: KYLAND Technology Pages: 24

Brand: Dynamix Pages: 102

Brand: Intellinet Pages: 2

Brand: Toto Link Pages: 57

Brand: LevelOne Pages: 142

Brand: ORiNG Pages: 101

Brand: TP-Link Pages: 25

Brand: Linksys Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands