Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 176 / 436

Configuration Commands
Page 176 7710 SR OS Interface Configuration Guide
Description This command enables the context to configure local MDA settings for ingress multicast path
management.
ancillary-override
Syntax ancillary-override
Context config>card>mda>ingress>mcast-mgmt
Description This command enables the context to configure ancillary path bandwidth override parameters.
path-limit
Syntax path-limit megabits-per-second
no path-limit
Context config>card>mda>ingress>mcast-mgmt>anc-override
Description This command overrides the path limits contained in the bandwidth policy associated with the MDA.
The no form of the command removes the path limit override from an ingress multicast path and
restores the path limit defined in the bandwidth policy associated with the MDA.
Parameters
megabits-per-second — Specifies the path limit override to give the upper limit that multicast
channels may use on each path.
Values
ancillary-override: 1 — 5000
primary-override: 1 — 2000
secondary-override: 1 — 2000
bandwidth-policy
Syntax bandwidth-policy policy-name
no bandwidth-policy
Context config>card>mda>ingress>mcast-mgmt
Description
This command specifies an existing multicast bandwidth policy. Bandwidth policies are used to
manage the ingress multicast path bandwidth. Each forwarding plane supports multicast forwarding
paths into the switch fabric. Bandwidth policy parameters are configured in the
config>mcast-mgmt
context.
Parameters
policy-name — Specifies an existing multicast bandwidth policy.