Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 137 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 137
Configuring LAG Parameters
LAG configurations should include at least two ports. Other considerations include:
• A maximum of eight ports can be included in a LAG. All ports in the LAG must share the
same characteristics (speed, duplex, hold-timer, etc.). The port characteristics are
inherited from the primary port.
• Autonegotiation must be disabled or set limited mode for ports that are part of a LAG to
guarantee a specific port speed.
• Ports in a LAG must be configured as full duplex.
The following example displays LAG configuration output:
A:ALA-A>config>lag# info detail
----------------------------------------------
description "LAG2"
mac 04:68:ff:00:00:01
port 1/1/1
port 1/3/1
port 1/5/1
port 1/7/1
port 1/9/1
dynamic-cost
port-threshold 4 action down
----------------------------------------------
A:ALA-A>config>lag#