Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 333 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 333
Temperature : 33C
Temperature threshold : 75C
Time of last boot : 2007/04/11 15:13:48
Current alarm state : alarm cleared
Base MAC address : 04:7b:01:05:00:01
==========================================================================
A:7710-3#
pools
Syntax pools mda - id [/ port ] [ access-app [ pool-name | service service-id ]]
pools mda - id [/ port ] [ network-app [ [pool-name ]]
Context show
Description
This command displays pool information.
Parameters
mda-id [/ port ] — Displays the pool information of the specified MDA.
access-app pool-name — Displays the pool information of the specified QoS policy.
Values
access-ingress, access-egress
service service-id — Displays pool information for the specified service.
Values
1 — 2147483647
queue-group queue-group-name — Display information for the specified queue group.
direction — Specifies to display information for the ingress or egress direction.
Values
ingress, egress
Output Show Pool Output —
The following table describes show pool output fields.
Label Description
Type Specifies the pool type.
ID Specifies the card/mda or card/MDA/port designation.
Application/Type Specifies the nature of usage the pool would be used for. The pools
could be used for access or network traffic at either ingress or egress.
Pool Name Specifies the name of the pool being used.
Resv CBS Specifies the percentage of pool size reserved for CBS.
Utilization Specifies the type of the slope policy.
State The administrative status of the port.
Start-Avg Specifies the percentage of the buffer utilized after which the drop
probability starts to rise above 0.