Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 149 / 436

Command Reference
7710 SR OS Interface Configuration Guide Page 149
— rate pir-rate [ cir cir-rate ]
— no rate
— scheduler-policy scheduler-policy-name
— no scheduler-policy
— secondary-shaper secondary-shaper-name rate { max | rate }
— secondary-shaper secondary-shaper-name
— autonegotiate [ limited ]
— [ no ] autonegotiate
— dot1q-etype
— no dot1q-etype
— dot1x
— max-auth-req max-auth-request
— port-control { auto | force-auth | force-unauth }
— quiet-period seconds
— radius-plcy name
— re-auth-period seconds
— [ no ] re-authentication
— server-timeout seconds
— no server-timeout
— supplicant-timeout seconds
— no supplicant-timeout
— transmit-period seconds
— no transmit-period
— down-when-looped
— keep-alive timer
— no keep-alive
— retry-timeout timer
— no retry-timeout
— [ no ] shutdown
— [ no ] use-broadcast-address
— duplex { full | half }
— efm-oam
— [ no ] accept-remote-loopback
— hold-time time-value
— no hold-time
— mode { active | passive }
— [ no ] shutdown
— [ no ] transmit-interval interval [ multiplier multiplier ]
— [ no ] tunneling
— egress-rate sub-rate
— no egress-rate
— [ no ] egress-scheduler-override
— level priority-level rate pir-rate [ cir cir-rate ]
— no level priority-level
— max-rate rate
— no max-rate
— egress-scheduler-policy port-scheduler-policy-name
— no egress-scheduler-policy
— encap-type { dot1q | null | qinq }
— no encap-type
— hold-time {[ up hold-time up ] [ down hold-time down ]}
— no hold-time
— [ no ] hsmda-scheduler-overrides
— group group-id rate rate
— no group group-id