Alcatel-Lucent 7710 SR OS, Interface Configuration Manual

Page: 233 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 233
Multilink-Bundle Port Commands
multilink-bundle
Syntax [ no ] multilink-bundle
Context config>port
Description
This command creates the context to configure bundle properties for this bundle port.
Default
None
fragment-threshold
Syntax fragment-threshold fragment-threshold
fragment-threshold unlimited
no fragment-threshold
Context config>port>multilink-bundle
Description
This command sets the maximum length in bytes of a fragment transmitted across a multilink bundle.
The no form of this command resets the fragment threshold back to the default value.
Default 128
Parameters fragment-threshold — Specify the maximum fragment length, in bytes, to be transmitted across a
multilink bundle. Note that the value range is dependent on the MDA type. For example:
channelized MDAs, such as the m1-choc12-sfp, m4-choc3-sfp, m12-chds3, and m4-chds3,
support values of 128, 256, 512; ASAP channelized MDAs support any value in the valid range.
Values 128 — 512 bytes inclusive for MLPPP and MLFR bundles
128 bytes for IMA bundles
unlimited — This keyword disables fragmentation (MLPPP and MLFR only).
interleave-fragments
Syntax [ no ] interleave-fragments
Context config>port>multilink-bundle
Description This command enables Link Fragmentation and Interleaving on the multilink bundle.
The no form of this command disables Link Fragmentation and Interleaving on the multilink bundle.