Alaxala AX2400S series, Hardware Instruction Manual

Page: 81 / 249

1. Components Overview
51
Num
ber Name Type Description LED
brightne
ss Details
Off -- A link failure or block
when the green ST1 LED
is lit.
#4
(7) T/R Green LED Blinking
green Normal Sending or receiving
frames.
Low
#3
(8) LINK Green/Oran
ge LED Indicates the operating
status of a
10/100/1000BASE-T
Ethernet port. Lit in
green Normal A link is established.
Low
#3
Lit in
orange Normal Detecting line
disturbances.
Low
#3
Off -- A link failure or block
when the green ST1 LED
is lit.
#4
(9) T/R Green LED Blinking
green Normal Sending or receiving
frames.
Low
#3
(10) ST2 Green LED (Not used) Off --
(11) ID1 to
ID4 Green LED (Not used) Off --
(12) RESET Button
(momentary
) Manual RESET button
of the device
#5
-- -- Restarts the device.
(13) MODE Button
(momentary
) (Not used) -- --
#1: Blinking green over a long period of time (on: 0.5 seconds; off: 5 seconds)
#2: Operating in power control (brightness) mode or off mode
#3: Operating in power control (brightness) mode
#4: In off mode, a link might be established, frames might be sent or received, or line
disturbances might be detected.
#5: The switch is behind the front panel. Use a small-head screwdriver to press it.
When attempting to push the RESET button, do not use a tool with a fragile tip, a
pin or a paper clip, which can be caught or dropped inside the switch and will not be
taken out. A fire or an electric shock might be caused.