Alaxala AX2400S series, Hardware Instruction Manual

Page: 29 / 249

Safety Information
Safety-15
Make sure that you use an appropriate combination of transceivers and
switches.

The switches below support SFP-FX and SFP-FX (T). Use them only with the
indicated switches. Otherwise, the switch might fail.
- AX3640S-24SW (target ports 5 to 24)
- AX3640S-24S2XW (target ports 5 to 24)
- AX3650S-20S6XW (target ports 1 to 20)

The switches below support SFP-SX2 and SFP-SX2 (T). Use them only with the
indicated switches. Otherwise, the switch might fail.
- AX2430S series
- AX3630S series
- AX3640S series
- AX3650S-20S6XW (target ports 1 to 20)
Do not shut off the power to the switch while the ST1 LED is blinking green.
(On: 0.5 seconds; off: 0.5 seconds)

In the following situations, do not switch off the Switch until the blinking green ST1
LED on the Switch front panel (on: 0.5 seconds; off: 0.5 seconds) turns to a constant
green. Otherwise, the Switch might break down:

Updating software
When carrying or packing a Switch and an optional module, wear a wrist strap
to protect against static electricity.

Be sure to wear an antistatic wrist strap. If you handle the Switch without wearing an
antistatic wrist strap, the Switch might be damaged by static electricity.
When carrying and packing optional modules, handle them carefully.

Do not touch a connector when carrying or packaging a transceiver, direct attach
cable, memory card, power supply unit, fan unit, or power supply module. Also, when
storing an optional module, use an antistatic bag.
Use care when handling an air duster.

Use an air duster specially designed for cleaning optical connectors. Using another
type of air duster could cause the ferrule tip to become dirty.

Keep the nozzle or container of the air duster from coming into contact with the ferrule
tip. Contact could result in a malfunction.