6) Set the network configurations of MG-45.
Press [SETUP]
on the
remote control to
go to the
setup
screen.
On that screen, select ‘DHCP Off’ and
enter the IP
address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After
entering
, press [SETUP] again
to
sav
e the
configuration
.
<MG-45’s IP Address>
9
If you have already been
assigned a
dynamic IP address
from
a
DHCP Server or IP Router on your local area
network,
you don’t need to
enter a
static IP address
.
Use ‘DHCP on’ or
enter
IP
an
address & Subnet
mask that
the
DHCP Server or
the
IP Router
assigns
.
9
If you have already
‘obtained an IP address
automatically’
via the
DHCP Server or IP Router on your
local area network, you don’t need to
enter a
specific IP
address
. If possible always
Obtain an IP address
automatically’
.
9
Check
‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address
on
the main
MENU screen after selecting
the
‘PC-Network’
icon on the "MODE"
Selection screen.
9
You need to connect the MG-45 to a TV to set this up
See “3.1.1 Connect Video Cable”.
20
Summary of Contents for Mediagate MG-45
Page 1: ......
