9) At above number 7) figure, click ‘Advanced’ Tab.
Disable ‘Internet Connection Firewall’.
Check ‘Off’ and click ‘OK’
9
If you have already been provided dynamic IP address
from
a
DHCP Server or IP Router on your local area
network,
you don’t need to
enter a
static IP address
.
Use ‘Obtain an IP address automatically on’
or enter
a
IP address & Subnet mask that
a
DHCP Server or
IP Router provide
s
.
10) Set the network configuration of
the
MG-45.
Press [SETUP]
on the
remote control
to go to
the
setup
screen. On that screen, select
‘
DHCP off
’
and
enter a
IP address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After
entering
, press [SETUP] again
to
sav
e
the
configuration.
9
You
need to connect the MG-45 to a TV to set this up.
See “3.1.1 Connect Video Cable”.
9
If you use service pack 2, refer to the following figures.
Click ‘Settings’
in
‘Windows Firewall’
26
Summary of Contents for Mediagate MG-45
Page 1: ......
