AL-MEISTER ALM3222 Instruction Manual <Rev.2>
Page
52
of
52
8. SPECIFICATIONS
SPECIFICATIONS:
*Corners are cut square.
*Warm-up time may differ according to the environment.
(end)
Model
ALM3222
Maximum Laminating Paper Width 13"
Maximum Laminating Thickness
16mil (including film thickness) (.016”)
Film Thickness & Type
1.5, 3mil or 5mil (.0015” - .003” - .005”) exclusive AL-Roll film with valid RFID
tag in place on lower roll.
Paper Thickness
3-10mil (65-240 gsm) (20# cover – 93# cover)(.003” – .01”)
Laminating Speed
20" - 68"/min. (adjustable in ”/min. increments)
Temperature
170F- 270F
Warm-up Time
Approx. 5-7 minutes
Power Source
AC 120V 60 Hz
Power Consumption
1,200W
Dimensions (W x L x H)
50.0"(W) X 23.6"(D) X 43.3"(H) with Stand, Feeder Tray, Feeder Tray Extension
and Exit Tray installed.
Weight
Laminator : 97 LBS; Stand : 52.9 LBS
Feeder capacity
200 pages (copying paper)
Exit Tray capacity
200 pages (copying paper laminated with 5mil film)
Finished Size (W x D) and Trimming
Methods
Letter (8.5 x 11”); With Margin: 8.74" X 11.24"; Without Margin: 8.5" X 11". Will
process 200 sheets/hour at this size.
Double Letter (11 x 17”); With Margin: 11.24" X 17.24"; Without Margin: 11" X
17"
Digital Paper (12 x 18”) With Margin: 12.24" X 18.24"; Without Margin: 12" X
18"
*The finished size is accurate to within less than 20mil either way.
Long Mode: Any of the above widths with unlimited length.
Environmental restriction
Within the range of 32F to 86F (68 +/- 40F recommended)/an altitude below
6600'.
Accessories
Box 1: Feeder Tray -- Extension Feeder Tray -- Exit Tray -- Power Cord
Box 2: Stand -- Stand Assembly Instructions -- Screws and tool for assembling
Stand-- Waste Collection Box.
