Operation
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 ·
24
o
Filter
– analog filter time constant within the range of 0.01…60 s with the
increment of 0.001 s, displayed in pairs. Use
/
buttons to navigate
between pairs.
o
Scale
– lower and upper limits for input signal scaling. Use
/
buttons to navigate between inputs.
Outputs
Digital
o
I/O state
– status of digital outputs, including LED indicators F1/F2,
displayed as a bitmask: 1/0 (ON/OFF). The first bit in the mask corresponds
to the output DO1, the last bit in the mask corresponds to the indicator F2.
Analog
o
I/O state
– status of analog outputs as REAL32 values within the range of
0…1, displayed in pairs. Use
/
buttons to navigate between pairs.
Interfaces
Interface configuration depends on the interface mode, Master or Slave. Select the interface
to view its parameters (sect. 4.3).
Slave mode
o
Settings
Baud rate
–
Data bits
–
Parity
–
Stop bits
o
Protocol
Interface mode /
Address
– master address
Master mode
o
Settings
Baud rate
–
Data bits
–
Parity
–
Stop bits
o
Protocol
Interface mode /
Devices
– list of slaves from the project
Address
– slave address
Period
– Query cycle (ms)
Timeout
– Time-out (ms)
Attemts
– Retries, max.
Pause
– Interval between requests (ms)
Modules
This menu item contains the information about the extension modules connected to the base
device. The item is hidden if there are no modules connected.
Fig. 5.3 Extension module connection
Password
Password can be set or changed (sect. 5.2).
5.3
Display programming
The display can be programmed using one or more display forms. To switch between two
display forms, jump conditions have to be created. Jump condition can be an event of a