Akytec PR200, User Manual, Page: 7 / 42

Specifications
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 ·
www.akytec.de
6
Device
230.1.x
230.2.x
230.4.x 24.1.x
24.2.x
24.4.x
Test voltage against
other circuits
2830 V
Table 2.3 Analog inputs
Device x.2.x, x.4.x
Galvanic isolation none
Analog mode
Input signal 0-10 V, 4-20 mA, 0-4000 ohm
Input voltage * -
36…+36 V
Input resistance (0-10 V) 61 kohm
Input resistance (4-20 mA) 121 ohm
Basic error
±0.5%
Temperature influence
±0.05%/10°C
Resolution
2.7 mV / 6 µA
ADC resolution 12 bit
Sampling time for 4 inputs, max 10 ms
Digital mode
Logic 1 **
0…10 V, adjustable
Logic 0 **
0…10 V, adjustable
Current at input voltage 15…30 V, max
5 mA
* If the voltage at one input is below -0.5 V, the accuracy for all inputs cannot be guaranteed.
** Parameter can be set in ALP
Property Box using the option Input mode = digital.
Table 2.4 Digital outputs
Type relay (NO)
Switching capacity AC 5 A, 250 V (resistive load)
Switching capacity DC 3 A, 30 V
Minimum load current 10 mA (at 5 V DC)
Service life, electrical
3 A, 30 V DC 200,000 switching cycles
5 A, 250 V AC (resistive load) 100,000 switching cycles
Galvanic isolation in groups of 2 (1-2, 3-4, 5-6, 7-8)
Test voltage between output groups 1780 V
Test voltage against other circuits 2830 V
Table 2.5 Analog outputs
Device x.2.x x.4.x
Auxiliary voltage
12…30 V DC 12…30 V DC
Quantity 2
Output signal 4-20 mA 0-10 V
Output load, max 1 kohm 2 kohm
Basic error, max
±0.5%
Temperature influence
±0.05%/10°C
Inductive load, max
50 µH
-
Signal conversion time 100 ms
DAC resolution 10 bit
Galvanic isolation 2830 V, individual 2830 V, in group