EDIT PROGRAM - MULTI
Page 116
S3000XL Operator’s Manual - Version 1.00
EDIT MULTI
EDIT SINGLE and EDIT MULTI are both essentially the same but there is one big difference. In
EDIT SINGLE, you can select any program for editing or create new ones or delete existing
ones but, in EDIT MULTI, you can only edit the sound assigned to the currently selected part.
For example, let’s say the attack of the string sound in PART 4 of the multi is too slow - in MULTI
mode, move the cursor to PART 4 and then press EDIT - this will take you immediately to the
offending strings program that needs adjustment and you may tweak its attack time
accordingly.
However, you will note that when editing a program in EDIT MULTI, you still hear the other
programs in the MULTI. This means that you can edit the program WITHIN THE CONTEXT OF
THE MULTI AND THE SEQUENCE THAT IS PLAYING. To use the above example again, as
the sequencer is running, you can select PART 4 and press EDIT and adjust the attack time
while the string part is being played alongside the other parts. This means that you can make
adjustments intuitively within the context of your song.
Also, when parts are layered on the same MIDI channel or when you have set up key splits, you
can hear the other layer(s) whilst editing a sound. Furthermore, if two identical programs are
layered on top of each other (for example, with detune, etc., for a fatter sound), selecting one
of them will cause both to be edited simultaneously. Using the above example again, if you feel
the attack of the strings program layered in part 1 and 2 is too slow, select one of them, press
EDIT and edit the attack time - both programs will be affected.
All this differs from most other modules where SINGLE and MULTI are two totally separate
modes and the EDIT SINGLE key refers to editing the single sound and the EDIT MULTI key
refers to editing or setting up the multi-mode’s parameters. On the S3200XL, the MULTI mode
is always active for setting up parts and EDIT MULTI is used for editing the programs assigned
to the parts. On most synths or samplers, in the above example, to edit the string’s attack time,
you would have to leave MULTI, go to SINGLE, find the string sound, press EDIT and edit it out
of context (i.e. you can’t hear the other parts playing ). You would then need to return to MULTI
and check it there. Of course, if the sound is still not quite right, you must repeat the whole
process again. Not so on the S3200XL - simply select the appropriate part and press EDIT to
adjust the sound within the context of the multi until it’s just right.
However, there are some program parameters that are not relevant to EDIT MULTI and these
are omitted when you enter EDIT from the MULTI mode. These include parameters such as
output level, pan, FX sends, MIDI channels, etc., which, of course, are set in the MULTI mode.
SCREEN DIFFERENCES IN EDIT MULTI
When in the MULTI mode, pressing EDIT will show something like this screen display:
This differs from EDIT SINGLE slightly in that you cannot select another program. To select
another program for editing in EDIT MULTI, return to the MULTI mode (i.e. press MULTI) and
select the part that contains the program you want to edit. Neither can you rename or delete
programs in EDIT MULTI as a safeguard against corrupting a MULTI you may have taken time to
create (if you really want to delete a program, go to EDIT SINGLE). You will note that in EDIT
MULTI, the part number and the number of active parts are shown on this page for your
information.