manualshive.com logo in svg

Akai S3200XL, Operator'S Manual

The "Akai S3200XL" Operator's Manual is a must-have for users of this exceptional product. Available to download for free from our website, this comprehensive manual provides detailed instructions, making it easy to operate and fully utilize the features of the Akai S3200XL.

Share
Download
background image

EDIT PROGRAM - SINGLE

Page 74

S3200XL Operator’s Manual - Version 1.00

MODULATION PAGES

The next group of pages we will look at also affects the program as a whole but also has a direct
influence on individual keygroups. These are the modulation pages where you may set the
parameters for the two low frequency oscillators and the pitch bend. You may also set the
parameters for the sostenuto pedal. These modulation sources may be applied to the filter,
loudness, pitch and panning for a wide range of the usual modulation effects such as vibrato or
for more outrageous synthesiser effects. These pages are accessed by pressing the 

key.

Pressing the 

  key displays this screen:

PITCH BEND

The first page we encounter is the PITCH page where you may set the parameters associated
with pitch bend. As usual, you may select a program for editing at the top right hand of the
corner.

The pitch bend on the S3200XL allows you to set a different range for bend up and down as
well as use pressure and a special mode is also available to make it more flexible. The
parameters are:

This sets the range for bending pitch up with the pitchbend wheel or
lever. The range is 0-24 semitones. The default is 2 semitones.

This sets the range for bending pitch down and, again, the range is 0-
24 semitones. The default is 2 semitones.

As well as using the pitchbend wheel or lever, you may also use
pressure to bend notes. The range is -12 to +12. You may only bend
up or down depending on the selection made - unlike the bend
wheel/lever, you cannot pitchbend both ways.

This is a mode select option that allows you to choose whether the
pitchbend will happen on all notes or only on held notes. This is
particularly useful on sounds with long releases. The options are
NORMAL and HELD.

Let us say, for example, that you have a sound that has a long release
and you are performing a solo that uses a lot of pitchbend. Using
NORMAL, when you pitchbend the note, all the notes currently in the
release stage of their envelope will also bend. Sometimes this is what
you want but there can be times when this spoils the effect you are
trying to create.

By selecting the HELD mode of pitchbend, ONLY THE KEY(S) YOU
ARE CURRENTLY HOLDING DOWN WILL BEND and all those notes
you are not playing but which are fading through their release stage
will remain unchanged. If you release your finger from the key with the
pitchbend up (or down), as the note dies away, if you let the
pitchbend return to zero, that last note’s pitch will not change. If you
release just one note of a chord with pitchbend up or down, if you let

Summary of Contents for S3200XL































































































































































































































































































































Reviews:

No comments

Related manuals for S3200XL

NAAD LD4 User Manual preview
LD4
Brand: NAAD Pages: 6
Racal Instruments 3152A Manual preview
3152A
Brand: Racal Instruments Pages: 176
AVP Synthesizers RITMOBOX User Manual preview
RITMOBOX
Brand: AVP Synthesizers Pages: 8
Korg 61key Owner'S Manual preview
61key
Brand: Korg Pages: 18
EarthQuake MEGA BASS MB1 Owner'S Manual & Warranty preview
MEGA BASS MB1
Brand: EarthQuake Pages: 9
JVC R-X40 Service Manual preview
R-X40
Brand: JVC Pages: 28
Waldorf IRIDIUM User Manual preview
IRIDIUM
Brand: Waldorf Pages: 215
Yamaha MOTIF ES6 Data List preview
MOTIF ES6
Brand: Yamaha Pages: 88
Modal Electronics 002R User Manual preview
002R
Brand: Modal Electronics Pages: 47
Moog Minimoog Tuning Procedure preview
Minimoog
Brand: Moog Pages: 7
Moog Drummer From Another Mother User Manual preview
Drummer From Another Mother
Brand: Moog Pages: 44
Moog Mini Voyager User Manual preview
Mini Voyager
Brand: Moog Pages: 116
Flame Tame Machine Manual preview
Tame Machine
Brand: Flame Pages: 2
Flame mMLFO Manual preview
mMLFO
Brand: Flame Pages: 16

Brands by name

Popular brands

Load more brands