manualshive.com logo in svg

Akai S3200XL, Operator'S Manual

Share
Download
Akai S3200XL Operator'S Manual Download Page 112

EDIT PROGRAM - SINGLE

Page 98

S3200XL Operator’s Manual - Version 1.00

THE FILTERS

Pressing 

 displays the main keygroup function select where you may access the filter

and the envelope generators:

From this page press the 

 key to take you to the filter page:

The S3200XL is equipped with 12dB/octave lowpass resonant filters as found on many
analogue synthesisers. As well as using them for the tonal modification of acoustic samples,
they also allow you to totally transform a sound.

‘Lowpass’ means that the filter will allow low frequencies to pass through unaffected whilst high
frequencies are removed.

CUTOFF FREQUENCY

HARMONICS

FREQUENCY

L
E

V

E
L

As the cutoff frequency is moved downwards, so high frequencies are gradually removed.

CUTOFF FREQUENCY

HARMONICS

FREQUENCY

L
E

V

E
L

This is very convenient when dealing with samples of acoustic instruments because as notes
die away, they tend to lose their higher frequency content first. By applying an envelope
generator to the filter’s cutoff frequency, we can emulate that on the sampler. Another
property of sound is that when it is played loud (ff) it is generally brighter than when it is played
softly (pp). Using the filter and applying velocity (or controlling the output of the filter’s

Summary of Contents for S3200XL































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands