manualshive.com logo in svg

Akai MPC 60, Operator'S Manual, Page: 166 / 228

Share
Download
Akai MPC 60 Operator'S Manual Download Page 166

 

 

 

166 

• If an ALL file is selected and <Load it> is pressed, the following screen 
will be displayed, warning you that all sequences and songs currently in 
memory will be erased:

Press <Load file> to load it. Once finished, the previous screen will be 
re-displayed. 

 
 

• If a SND file is selected and <Load it> is pressed, the following 
screen will be displayed, asking you to select the drum to load the 
sound into: 

Select the drum to be loaded into, then press <Load file>. Once 
loaded, the previous screen will be re-displayed. 

 

NOTE: If the sound file you are loading already exists in memory 
(assigned to a different drum), the MPC60 recognizes that it is already 
in memory and doesn't load it. Instead, it internally assigns the existing 
sound to the two drum pads to save memory. This is very useful, for 
example, if you want to play a single tomtom sound from four pads at 
different pitches, without wasting memory by loading the same tom-tom 
sound four times. 

 
 

• If a SET file is selected and <Load it> is pressed, the following 
screen will be displayed, asking you if you want to load the entire file 
or only a single sound from it:

Summary of Contents for MPC 60





































































































































































































































Reviews:

No comments