manualshive.com logo in svg

Akai MPC 60, Operator'S Manual, Page: 143 / 228

Share
Download
Akai MPC 60 Operator'S Manual Download Page 143

 

 

Section 6: Sampling and editing sounds

 

143

 

 
 
 

6.7 Transferring sounds over midi: Midi Sample 
Dump 

 

The Midi Sample Dump standard is a format which manufacturers agree 

upon for transferring samples between sampling devices over midi. To use 

this feature, you must first connect the MPC60 to the external sampler using 

2 midi cables ("closed loop" mode)- the MPC60 will not allow midi sample 

dump transfers using a single midi cable ("open loop" mode). To connect the 

MPC60 to the external sampler: 

 

1. Connect one midi cable from one of the MPC60's MIDI OUT 

jacks to the external sampler's MIDI IN jack. It doesn't matter 

which one - you can select any one in the MIDI OUTPUT 

field described below. 

 

2. Connect a second midi cable from the external sampler's MIDI 

OUT jack to the one of the MPC60's MIDI IN jacks (it doesn't 

matter which one - you can select either in one the MIDI 

INPUT field, described below). 

 

Receiving and sending Midi sample dumps are individually described 

in the following two sections. 

 

 

Receiving a Midi sample dump from an 
external sampler 

 

To receive a Midi sample dump, press the SOUNDS key, then type 6 to 

select the MIDI SAMPLE DUMP option, and the following screen will 

appear: 

This is the "Receive sample dump" screen. The screen fields and soft keys 

are described below: 

 

• The MIDI INPUT field:  

This is the Midi input jack number (1 or 2) through which the sound data 

will be received. Set this field to the number of the midi input jack you used 

to connect to the external sampler. 

Summary of Contents for MPC 60





































































































































































































































Reviews:

No comments